High oil yield waste tyre recycling plant
We are providing new designed waste tyre recycling plant which use scrap plastic and waste tire as raw materials to extract fuel oil. The recycling process is environmentally friendly and will not cause the 2nd pollution. For whom have many scrap or waste plastic/tire rubbish now can turn your rubbish into money. After years research and improvement, our waste tyre recycling plant is high oil yield, make sure you can get more profit.

High oil yield waste tyre recycling plant  


Working process of waste tyre recycling plant:

Firstly, put the raw material into furnace, then seal the feed inlet system.
Secondly, burn the fuel material (coal. wood, gas or oil) in the combustion system, the reactor will slowly heat, when the temperature reaches around the certain temperature, it will from solid into gas ,the oil gas will be produced by our technology, then go into the Catalytic Chamber to speed up the reaction and clean out the wax and other impurity. Then go to water-oil separator, and the heavy oil will be separated, and then go through the cooling system to be liquid oil, the gas which cannot be liquid will be recycled to the reactor for heating.
At the same time, the dust removal device will clean up the dust in the gas, then the gas through the Condenser being cooled into liquid, then the gas exhausted to the air is little, so it is no pollution and energy saving.

High oil yield waste tyre recycling plant
  

Oil yield of different materials:

Raw material Oil Yield Steel wire Carbon Black Water
Waste tire/rubber Big tyres 45%-50% 15%-20% 30% 5%-10%
Car tyres 40% 10%-15% 45% 5%-10%
Bicycles and motorcycles tyres 30%-35% 5%-10% 45% 5%-10%
Waste plastic Fishing net 45%-50%   30%  
Safety net, farm-oriented film 45%-50%   25%  
Convenient bags, weave bags 40%   30%  
Off-cut of recycled paper mill 20%-30%   20%

Usage of the final products :

Fuel Oil(40% to 45%): Can be used as industrial fuel for burning.
Crude Carbon Black(30% to 35%): Can be sold to the brick factory as internal combustion or to the factory needing it as raw materials, such as tire, shoe, cable and sealant companies.
Steel Wire(15% to 20%): Can be sold to the iron and steel company directly.
Gas(5%): Can return to the hearth to burn as fuel, so that you can save cost to buy wood or coal.

  
Profit analysis:

(here we take 10 ton waste tyre recycling plant as example)  

Cost:

Raw material cost: ___USD / TON×10Ton= ___ USD
Fuel material cost: ___ USD / KG× ___KG= ___ USD
(Here you could have four different choices: 5000 kilocalorie Coal—500kg, Fuel oil—170-200kg, Natural gas—270-300cubic, Wood—700-800kg)
Powder consumption: Average 10KW/h ___USD/KW×20hours= ___USD
Worker’s salary: ___USD/Day×4Persons= ___USD  

Profit:

Oil Profit: ___ USD/Ton×4.5Ton= ___USD
Carbon black: ___ USD/Ton×3Ton= ___USD
Steel wire: ___ USD/Ton×1.5Ton= ___USD  

Gross Profit:

Total profit ___ USD - Total cost  ___ USD= ___ USD
Note:You can calculate profit according to local situation. Generally speaking, you could recover your cost in 4 to 5 months, one year later, you will become very rich.
  

Advantages of our waste tyre recycling plant:

(1) safety.

we have some safe devices such as the pressure gauge, alarming ring,safety valve.at thesame time we have the anti-back fire device which can avoid the fire back into the reactor.  

(2) Environment  protecting.

if you come to visit our company to see the running plant,you can not even see the vapor. as we have the dust removal device and dust removal pool.  

(3) Energy saving.

our anti-back fire device can collect the exhaust gases which can be fuels after the oil is out so is very convenient and you can save the energy .at the same time,we have the catalyst
chamber which can reduce the temperature of the catalytic prolysis of the tires and plastics. so you can save lot's of energy. except this ,we have vaccum device which let the reactor be negative pressure.so you can image.  

(4) High degree of automatic.

we have many automatical decices such as: auto-feeder,carbon black elevater,oil pumping automatic,reducing pressure automatic.
  

Certificates:
High oil yield waste tyre recycling plant
  
HUAYIN customers:
High oil yield waste tyre recycling plant
  
CNC machinery:

High oil yield waste tyre recycling plant 

HUAYIN company is a professional manufacturer and supplier of waste tyre recycling plant, we have 20 years experience in this field, we can provide you the best quality equipment and services, need more information,please contact us.

pyrolysis oil

services

Supply the most current design and technical expertise; Supply parts sales and training service far beyond the initial sale; Your profits with quality parts and expert service.

+86-371-55917087
Fax: +86-371-55917067
Online order
  • Select product
  • *Country Name
  • *Name
  • Tel
  • *E-mail
  • Skype
  • Wechat
  • whatsApp
  • Facebook
  • Twitter
  • Message
online