网站客服
Professional waste tire pyrolysis plant, made by huayin company

Waste Tire Generation:

Although today’s tires last for more miles than they did in the past, the number of cars on the road is increasing and the average number of miles driven annually is also increasing. In some big cities, the standard assumption is that waste (also know as scrap) tires are generated at a rate of one tire per person per year. Thinking about this, one tire per person per year, there approximately 7 billion, and the population of the cities is increasing continuously. The number of waste tire is becoming more and more, what was worse, they are very hard to disposal, if we just let it happen, our home land will be surrounded by wastes.
Traditionally, waste tire was burned for cogeneration, this is a good way to deal with waste tires, but it is not good enough, because, when tires were burned, some harmful gas will be discharge, environment will be polluted. This bad for our heathy. So we need a better idea to solve this problem.
At present, a new project was come into being, waste tire pyrolysis , convert waste tire into crude oil, during the process, the harmful elements were properly managed, getting energy from waste without any pollution.
Xinxiang huayin renewable energy equipment CO.,Ltd is specialized manufacturing waste tire pyrolysis plant, we have done this area for 20 years, after years research and improvement, our plant has been accepted by market and customers, our products win a large number of customers both at home and abroad, and also enjoy a good reputation.

Waste tire pyrolysis plant:

Product parameters:

Introduction of main parts and features of waste tire pyrolysis plant
Reactor  1. Made by Q345R boiler plate. Also can choose SS310, 310S+Q345R
2. Auto-welding both inside and outside
3. With rock wool insulation board
 
Auto-feeder 1. 50 ton hydraulic pressure   2. Can feed all types of materials
3. Save labor and save time
 
Catalyst chamber 1. Improve oil yield and oil quality
2. Reduce the speed of oil gas so that it can be better cooled
 
Oil-water separator 1. Separate oil and water
2. Collect heavy oil
3.Water sealing design keep safety
 
Condenser 1. The oil gas is cooled separately by small pipes inside condenser
2. Light oil is collected here
 
Vacuum device Keep machine running under normal pressure
 
Anti-back fire device 1. Recycle residual gas to furnace as fuel
2. Water sealing design prevent tempering
 
Dust removal device Dispose of flue gas caused by using coal, wood, oil or natural gas.
 


Working process:

First,put the raw material into reactor door, seal the feed inlet system.
Second,burn the fuel material(coal,wood,or natural gas ,oil ) in the combustion system .The reactor will slowly be heated ,when the temperature reach around 250 °C,it will produce oil gas .
Third,oil gas will go to cooling system ,it will cold into liquid oil by the water cooling.The gas which can not liquid under normal pressure ,which are designed back to combustion system,as fuel in place of the fuel material to heat the reactor which can save energy .After oil comes out fully ,the temperature of reactor will go down .At the same time ,carbon black will be discharged automatically.
Lastly,when the temperature fall to 100 °C,worker could open the door of reactor to discharge of steel wire, then can start another batch working.

Main features :

Safety:

1. With an auto welding machine for the reactor, it can not only greatly improve working efficiency but also guarantee the quality of welding seam, thus avoid explosion caused by gas leak.
2. Professional heating treatment and x-ray detection chamber are especially for welding.
3. Vacuum system will prevent oil gas from  going back to reactor and causing accident.
4. Professional thermometer, pressure gauge and safety valve.
5.It is dangerous to burn exhaust gas(C1 to C4) without any safety measures. In our process, it is transferred first through the safety device and a safety burning air muzzle. Before burning, we should ensure the safety of production.

Environment friendly:

1.Well water de-dusting system can avoid black smoke.
2.The exhaust gas will be recycled for heating reactor, no gas pollution
3.Every junction of the reactor is in good sealing situation with professional sealing material.

Long service life:

1.Material: Q245R special steel plate ,thickness 14mm.
2. Welding: Automatic welding machine with heating treatment and x-ray detection will prolong the service life of reactor to the max.3. The service life of the reactor will be 8 -10 years
Energy saving:
1. Well sealing for heating system , no gas leak and saving fuel.
2. The exhaust gas will be recycled for reactor heating .
Huayin is a professional manufacturer of waste tire pyrolysis plant, we provide high quality products and excellent services. Welcome your inquiry and visiting.
pyrolysis oil

services

Supply the most current design and technical expertise; Supply parts sales and training service far beyond the initial sale; Your profits with quality parts and expert service.

+86-371-55917087
Fax: +86-371-55917067
Online order
  • Select product
  • *Country Name
  • *Name
  • Tel
  • *E-mail
  • Skype
  • Wechat
  • whatsApp
  • Facebook
  • Twitter
  • Message