Established an equipment display factory and laboratory with an area of more than 9,000 square meters, dedicated to equipment research and development and testing, technical staff training and practical operation.
oil sludge pyrolysis plant is a good solution to recycle oil from oil sludge and eleminate pollution because:1. It is 100% recycling;2. It has no secondary pollution
When extracting oil in oil fields, there will be some sludge during extraction, in the bottom of oil tanks, etc. As it still has some oil in such sludge. It will be profitable if you can again extract oil from such sludge.
There will also be some ground oil sludge during transportation. If remaining not recycled, they will occupy space and cause soil pollution.
And oil sludge pyrolysis plant is a good solution to recycle oil from oil sludge and eliminate pollution because:
1. It is 100% recycling.
2. It has no secondary pollution.
3. Very dry slag, meeting environmental and (Less than 0.1% oil in the ash from Huayin plant, fully meeting the national waste disposal standards (0.3%).
4. The whole process is eco-friendly.
Features: 1.The pyrolysis reactor offers an oxygen-free and high- temperature working condition for pyrolysis process of feedstocks. 2.Manufactured with good material of Q245R boiler plate. 3.The rollers are engineered under the feeding port and oil outlet port which is external from the heating area to bring perfect rotating balance and long service life. 4.Safe operation. |
|
Features: 1.Condensing process is divided into three stages. Pyrolysis gas passes through horizontal condenser pipe x1, horizontal condenser ×3 and vertical condenser x1 in sequence, to maximize the condensing effect. 2.Combustible gas (non-condensable gas) is collected by the system and routed to heating system as a fuel supply. It saves fuel consumption meanwhile protect the environment. |
|
Features: 1.Water film deduster provides the basic emission control effect. 2.Easy maintenance. |
|
Features: 1.Carbon black is conveyed in a sealed condition to achieve pollution-free. 2.The screw conveyor is combined with a condenser to help cool down carbon black. 3.Easy storage and packing from screw conveyor. |
|
Features: 1.Heating system is consuming two kinds of fuels. One is pyrolysis oil produced by pyrolysis plant, another one is combustible gas generated from production process, which means that the plant can run on its own fuel supplies without extra cost. 2.The heating system could be constructed above the ground or under the ground based on customer’s requirement. Civil work drawings would be provided prior to the arrival of equipment to prepare the site for installation. |
|
Features: 1.Hydraulic feeder can load more feedstocks since it can compact feedstocks while feeding. 2.Less feeding time and more loading capacity than manual feeding. 3.No workers enter inside pyrolysis reactor to ensure safe operation. 4.Short internal time to start the next production batch. |
Product Mode
|
Model A
|
Overall Dimension
|
35m*11m
|
Total Weight
|
32,000 KG
|
Working Mode
|
Batch Type
|
Average Power
|
15 KW
|
Power Voltage
|
380v
|
Unit Loading Volume
|
40.6m3
|
Average Loading Capacity
|
10,000 KG
|
Average Oil Yield
|
40%
|
Electricity Consumption
|
360 Kwh/Batch
|
Fuel Consumption
|
350L Fuel Oil |
1.The waste oil sludge pyrolysis plant is equipped with an automatic feeding system.
2.It uses direct condensation method. Oil gas can be cooled to liquid.
3.Waste water and exhaust gas have been processed by special machines; there is no pollutant emission. It is very environmentally friendly.
4.Our plant has been equipped with pressure gauge, automatic warning device, it is very safe.
Fuel oil:
1: Being added into heavy oil generators to produce electricity.
2: Being used as heating material in ceramic factory, glass factory, power plants, steel making factory, boiler factory, ect.
Syngas:
Being recycled into the furnace as fuel for heating the reactor.
Ash:
Being used to make baking-free bricks or in road construction.
Some of Huayin Waste Oil Sludge Pyrolysis Plant Project in Asia
Waste Oil Sludge Pyrolysis Plant Project in Europe
Waste Oil Sludge Pyrolysis Plant Project in Africa
Other Countries of the Waste Oil Sludge Pyrolysis Plant Project
Established an equipment display factory and laboratory with an area of more than 9,000 square meters, dedicated to equipment research and development and testing, technical staff training and practical operation.
From procurement, production to acceptance, we have a complete production process and strict quality control system to ensure that every link is done to the extreme.
We will formulate the transportation schedule one week in advance, book the space in advance, and assist customers in solving all problems in the delivery plan to ensure that the goods are delivered to customers on time.
Before or after the goods arrive at the customer site, the corresponding professional engineers are dispatched to guide the on-site installation and adjustment according to different factory configurations.