Established an equipment display factory and laboratory with an area of more than 9,000 square meters, dedicated to equipment research and development and testing, technical staff training and practical operation.
With the development of global economic and industry, countless amount of rubber, waste tire and waste plastics are generated every day, which put enormous stress on environment. Nowadays more and more people are paying great attention to environmental protection. And with technical development, more advanced continuous pyrolysis plant are in greater demand than batch design. And Huayin's continuous pyrolysis plant can realize 24 hours' working without stopping, greatly saving labor and ...
With the development of global economy and industry, countless amounts of rubber, waste tire, and waste plastics are generated every day, which put enormous stress on the environment. Nowadays more and more people are paying great attention to environmental protection.
And with technical development, more advanced continuous pyrolysis plant are in greater demand than batch design.
And Huayin's continuous pyrolysis plant can realize 24 hours' of working without stopping, greatly saving labor and improving efficiency.
| Technical data | HY-30 Continuous pyrolysis plant |
| Capacity | 30-50 tons/day |
| Voltage | 380V/50hz |
| Electric power consumption | 11KW |
| Alternative fuel type for startup | Natural gas/heavy fuel oil |
| Heavy fuel oil | 800kg/Day |
| Lead time | 45Days |
| Plant minimum area occupied | 32 meters length, 15 meters width, 10 meters height |
| Condensation assembly weight | 7±5% tons |
| Pyrolysis reactor weight | 40±5% tons |
| Pyrolysis reactor diameter | 1700 mm |
| Maximum temperature of oil gas | 200 ℃ |
| Cooling media type and its temperature at the inlet of the HX | Cooling water no more than 40 ℃ |
| Required utilities | Initial cooling water supply Electric power supply |
The source material is continuously fed into pyrolysis reactor, where it is decomposed under heating in a primarily non-reactive environment.
1. Solid wastes (plastic/tyre/rubber) are fed by a screw conveyor from the hopper.
2. The pyrolysis reactor is heated by the fuel burner. When the heat temperature rises to the set value, the decomposition process starts.
3. After the operation process is stable, heating is carried out by gas burner operating on pyrolysis gas.
4. From the pyrolysis reactor, the oil gas goes into condensers. Then it is cooled in the heat exchanger.
5. Oil gas enters the condenser, cools down to liquid while the non-condensed gas is used as fuel to sustain the heating process, enhancing its performance and significantly reducing operating costs.
6. The solid residue is discharged from the lower part of the reactor and shifted to receiving hoppers by the screw conveyor without oxygen access.
Established an equipment display factory and laboratory with an area of more than 9,000 square meters, dedicated to equipment research and development and testing, technical staff training and practical operation.
From procurement, production to acceptance, we have a complete production process and strict quality control system to ensure that every link is done to the extreme.
We will formulate the transportation schedule one week in advance, book the space in advance, and assist customers in solving all problems in the delivery plan to ensure that the goods are delivered to customers on time.
Before or after the goods arrive at the customer site, the corresponding professional engineers are dispatched to guide the on-site installation and adjustment according to different factory configurations.
