Established an equipment display factory and laboratory with an area of more than 9,000 square meters, dedicated to equipment research and development and testing, technical staff training and practical operation.
More than the presentation, Model M Waste Plastic Pyrolysis Plant is fully operational. And it’s super easy to assemble. All you need to do is connect water, electricity and fuel supplies.
There are many types of plastics, which are widely used in various fields, but also produce a large number of waste plastics. These plastics are difficult to degrade in their natural state and cause pollution to the environment. Therefore, it is particularly important to deal with waste plastics in a reasonable way. According to the research, pyrolysis oil refining is one of the more commonly used methods to deal with waste plastics. The pyrolysis can not only recycle waste plastics but also alleviate the environmental pollution caused by improper disposal of waste plastics. The waste plastics can be cracked into fuel oil, carbon black, combustible gas and other products through the waste plastic pyrolysis technology, and the process is pollution-free.
FEASIBILITY STUDY
Before you invest a bunch of money and start the construction of a large plant, you might want to know how it works, run some tests on the raw materials, acquire some knowledge of the production process, and find out if the product and supplier could meet your expectation. Then Model M is a perfect choice. It’s a small-scale model of the large-scale plant meanwhile it works exactly in the same way, and more importantly, it costs much less. So it might be a good choice for you to start with a small one before you move on to the big one.
PRESENTATION
Pyrolysis plant is a kind of big machinery that covers a big area of 400 m2 per unit. It won’t be easy for you to present the whole plant. While Model M can easily do the job. It covers only around 4 m2, so you could place it anywhere you want and show it to the authorities, investors, clients, and your friends.
EXPERIMENT
More than the presentation, Model M is fully operational. And it’s super easy to assemble. All you need to do is connect water, electricity and fuel supplies. It can be used to test the oil production rate of different raw materials and do other experiments.
1. Reactor: Adopt automatic welding machine, X rays detection and heating treatment which will not only guarantee the quality of welding but also greatly improve working efficiency.
2. Waste Gas Treatment: The extra gas will be recycled to the furnace for second burning thus saving your heating fuel, and protecting the environment.
3. The mini type pyrolysis plant is mainly used for doing tests or demonstrating.
4. Security: Anti-blocking device and have pressure gauges, alarms and safety valves to ensure the safety
5. The whole set just needs a very small landing area, that can be installed in the office.
|
Product Model
|
Model M
|
|
Overall Dimension
|
4m*1m
|
|
Total Weight
|
405 KG
|
|
Working Mode
|
Batch Type
|
|
Average Power
|
120W
|
|
Power Voltage
|
380v
|
|
Average Loading Capacity
|
10 KG
|
|
Average Oil Yield
|
40% |
FUEL OIL
The production rate of fuel oil is 40% on average. It's also known as tyre oil, pyrolysis oil, heating oil or furnace oil. The application is as heating fuel for industries such as power plant, cement plant, steel plant, metallurgical plant, glass factory, etc.
CARBON BLACK
It produces approximately 35% of carbon black from used tyres. Carbon black is the raw material for the rubber&plastic industry or used as heating fuel.
COMBUSTIBLE GAS
Combustible gas is routed to the heating system as a fuel supply. It saves the consumption of fuel oil.
|
Plastics |
PE |
50%-75% |
|
|
PP |
50%-75% |
|
|
PS |
50%-75% |
|
|
ABS |
40% |
|
|
Leftovers of paper |
Wet 15-20%, dry 60% |
|
|
House garbage |
35-50% |
|
|
Plastic cable |
80% |
|
|
Plastic bag |
50% |
|
|
Submarine cable |
75% |
|
|
Rubber cable |
35% |
|
|
Sole |
30% |
|
|
PVC |
Not suitable |
|
|
PET |
Not suitable |
|
Tires |
Car tires |
40%-45% |
|
|
Truck tires |
45%-50% |
|
|
Motorcycle and bicycle tires |
25%-30% |
Some of Huayin Waste Plastic Pyrolysis Plant Project in Asia
Waste Plastic Pyrolysis Plant Project in Europe
Waste Plastic Pyrolysis Plant Project in Africa
Other Countries of the Waste Plastic Pyrolysis Plant Project
Established an equipment display factory and laboratory with an area of more than 9,000 square meters, dedicated to equipment research and development and testing, technical staff training and practical operation.
From procurement, production to acceptance, we have a complete production process and strict quality control system to ensure that every link is done to the extreme.
We will formulate the transportation schedule one week in advance, book the space in advance, and assist customers in solving all problems in the delivery plan to ensure that the goods are delivered to customers on time.
Before or after the goods arrive at the customer site, the corresponding professional engineers are dispatched to guide the on-site installation and adjustment according to different factory configurations.
