Established an equipment display factory and laboratory with an area of more than 9,000 square meters, dedicated to equipment research and development and testing, technical staff training and practical operation.
When extracting oil in oil fields, there will be some sludge during extraction, in the bottom of oil tanks, etc. As it still has some oil in such sludge. It will be profitable if you can again extract oil from such sludge. There will also be some ground oil sludge during transportation. If remaining not recycled, they will occupy space and cause soil pollution. And pyrolysis plant is a good solution to recycle oil from oil sludge and eliminate pollution because 1. It is 100% recycling ...
When extracting oil in oil fields, there will be some sludge during extraction, in the bottom of oil tanks, etc. As it still has some oil in such sludge. It will be profitable if you can again extract oil from such sludge.
There will also be some ground oil sludge during transportation. If remaining not recycled, they will occupy space and cause soil pollution.
An oil sludge pyrolysis plant is a good solution to recycle oil from oil sludge and eliminate pollution because:
1. It is 100% recycling.
2. It has no secondary pollution.
3. Very dry slag, meeting environmental and (Less than 0.1% oil in the ash from Huayin plant, fully meeting the national waste disposal standards (0.3%)).
4. The whole process is eco-friendly.
5. Huayin oil sludge plants have been installed in Sichuan Province (China), Xinjiang Uygur Autonomous Region (China), Albania, Egypt and Indonesia.
Item |
Content |
|
Raw materials |
oil Sludge |
|
|
Output |
Fuel oil, Ash, Flammable gas. |
|
Model |
Reactor size |
Capacity |
HY1500*3000 |
1 T/batch |
|
HY2200*5500 |
5 T/batch |
|
HY2200*7500 |
7 T/batch |
|
HY2600*6600 |
8 T/batch |
|
HY2800*6000 |
9 T/batch |
|
HY2800*6600 |
10 T/batch |
|
HY2800*8000 |
15 T/batch |
|
Remarks |
Huayin provides 10kg and 200kg-300kg customized pilot pyrolysis plants. |
|
Reactor material and thickness |
Q345R/Q245R/310S (Boiler plate/stainless steel) 14mm/16mm/18mm |
|
Main parts |
Reactor, cooling system, dedusting system, safety system, carbon black discharging system, combustible gas recycling system, automatic feeding system. |
|
The whole plant weight |
15-45 tons |
|
Land area |
300-400㎡ (L30-40m*W10m) |
|
Number of workers |
3-4 |
|
Oil density and calorific value |
0.89g/cm³&44.30MJ/KG |
|
Processing time and power |
10-24 hours. Averagely 15KW/h |
|
Certification |
CE, ISO, BV, SUV, SGS Oil Report, Emission Report, 11 patents |
|
Safety: Huayin oil sludge pyrolysis plants have the following measures to ensure safety
Automatic pressure release device: Releasing pressure automatically when pressure occurs and is higher than the set data due to improper plant operation.
Oil water separator: Its water sealing design ensures that oil and gas are separated and combustible gas can not return to the reactor.
Energy saving:
The inner reactor body and outside insulation cover have good airtightness, avoiding heating loss and saving fuel.
The combustible gas below C4(oil and gas that cannot be further cooled down into fuel oil under normal temperature and pressure)will be recycled to the furnace for heating the reactor, maximizing resource utilization.
The cooling water adopts circulating mode, which is pollution-free, no discharging, and recyclable.
Service life:
Huayin takes plant performance and clients' operating methods into full account and pays attention to product design and quality to extend the plant service life, thereby increasing clients' return on investment.
Automation:
For regions where it's difficult to find good workers or where labor costs are high, Huayin provides PLC-based automation control systems.
Item |
Application |
Fuel oil |
1. Being added into heavy oil generators to produce electricity. 2. Being used as heating material in the ceramic factory, glass factory, power plants, steel making factory, boiler factory, ect. |
Syngas |
Being recycled into the furnace as fuel for heating the reactor. |
Ash |
Being used to make baking-free bricks or in road construction. |
Established an equipment display factory and laboratory with an area of more than 9,000 square meters, dedicated to equipment research and development and testing, technical staff training and practical operation.
From procurement, production to acceptance, we have a complete production process and strict quality control system to ensure that every link is done to the extreme.
We will formulate the transportation schedule one week in advance, book the space in advance, and assist customers in solving all problems in the delivery plan to ensure that the goods are delivered to customers on time.
Before or after the goods arrive at the customer site, the corresponding professional engineers are dispatched to guide the on-site installation and adjustment according to different factory configurations.
